DCP 115C All-In-One InkJet Printer

DCP 115C All-In-One InkJet Printer

Have replaced the ink cartridges and it's still saying they are empty

Posted by beverleydn on Mar 04, 2010

★ ★ ★ ★ ☆ 4.0 stars

DCP 115C All-In-One InkJet Printer

Product Troubleshooting for DCP 115C All-In-One InkJet Printer


Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Answers :


Hi there There are only a few steps you need to do to reset a Brother printer ink cartridge and once you do it, you will be up and printing in no time. There are actually two things that a Brother printer uses to detect ink and you can manipulate one or the other. Instructions Things You'll Need: · Black electrical tape, masking tape or duct tape 1. Step 1 Identify the printer If your printer uses memory, you can tell which printer you have by looking at where the cartridge goes in, if you see two "eyes" and a part of the cartridge goes in between them, follow Step 3. Otherwise, continue with Step 2. 2. Step 2 Clear the memory by taking the cartridge out and unplugging the unit for 30 seconds. Then, plug it back in and put back in the cartridge. You may need to do this five times, as the memory holds the last five cartridges. 3. Step 3 If the Brother printer has "eyes" where the cartridge goes, you will need to block in between them with a piece of tape so that it thinks the cartridge is always full. Simply put a piece of tape on the piece of the cartridge that goes in between the eyes to block the path of the infrared beam Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping. All The Best: Pineworks
Hi there
Having problems with your DCP 115C All-In-One InkJet Printer ?

Loading ...

Load time: 0.0479 seconds